5-Star Reviews

Open Hours: Mon to Fri: 7 am to 8pm


Are Your Pipes Corroded?

Do you think that your plumbing pipes might be corroded? We have discussed the different signs of pipe corrosion and suggested ways to fix them in this guide.

Steven Bahbah

Steven Bahbah

Pipe corrosion is possibly one of the worst fears of a homeowner. It can be a troublesome problem to fix if not dealt with immediately.

When your pipes get corroded, the water becomes contaminated with toxic materials. Needless to say, this is a major health risk for you and your family. Not only that, but a corroded pipe is also more vulnerable to leaks and damage than a healthy pipe.

Pipes Corroded

So, sitting on this problem is not the best idea. You need to get it resolved as soon as possible. And that’s why this guide highlights the causes and fixes of pipe corrosion.

Why Do Your Pipes Corrode?

Pipes corrode over time because of extensive usage. The water flowing through the pipes gradually eats away the materials, leading to corrosion.

Valve Corrosion

Luckily, modern piping technologies have made it so that you can considerably slow down the corrosion process. Even then, corrosion is inevitable since regular usage will eventually wear away the pipe with time.

However, the corrosion process may get accelerated under certain circumstances, as described below.

1. pH Imbalance

Plumbing pipes are designed to operate under neutral or near-neutral pH. If the pH of the water gets imbalanced, it generally indicates that it has become too acidic or too basic. Such water will naturally corrode the pipes faster than usual.

2. Hard Water

Tap Corroding

Hard water contains higher concentrations of dissolved minerals, such as calcium and magnesium. These minerals react strongly with the materials of the pipe, which ultimately contributes to its corrosion. So, if you live in an area that supplies hard water, your pipes will be more susceptible to corroding.

3. High Water Velocity

If the water flowing through the pipes has a relatively higher velocity than normal, then it will wear out the inner lining of the pipes much faster. This is usually observed in narrow pipes, where the water pressure increases, increasing the flow velocity.

How To Tell If Your Pipes Are Corroded?

Detecting this problem in time is the first step to fixing it. For this, you need to check for any signs associated with this issue. If you want to know what these are, then read below.

Hole Corroded Pipe

1. Discolouration

Discolouration of the water is the most obvious sign of pipe corrosion. When your pipes become corroded, the water will have a brown or reddish tint caused by the oxidation of pipe materials.

2. Foul Odours

Another telltale sign of a corroded pipe is the emergence of foul odours from the water. During the corrosion process, the oxidised pipe material releases toxic substances in the water, which have unpleasant odours.

3. Odd Taste

Odd-tasting water is another common indicator of a corroded pipe. The process of oxidation of pipe materials releases too many minerals into the water, which gives it a weird metallic taste.

4. Leaks

When the pipes become corroded, their overall structural integrity becomes weaker. Because of that, they get damaged too easily, which causes the water to leak out. In addition, corrosion in the pipe joints reduces their capacity to handle high pressure, which often causes them to burst and leak water.

5. Frequent Clogs

If your pipes are getting clogged too frequently, then it is an indication of corrosion. When the pipe starts to rust, it releases a lot of foreign materials and debris, eventually building up and blocking the flow of water.

How To Fix Corroded Pipes?

Close Corroded Pipe

The key to resolving pipe corrosion issues is early detection. Once you have identified the problem in its nascent phase, you can implement some simple DIY solutions to get rid of it.

The easiest solution is to scrub the rust from your pipes. To do this, you need to use a long-handled wire brush to reach the spot of corrosion. Then scrub it gently to remove any rust build-up and loose debris and make the pipe smooth.

Another viable solution to remove rust and corrosion is to pour mild chemical solvents through the pipes. These solvents will flush away the excess mineral buildup at the corrosion site, thereby preventing its oxidation. However, we would recommend against using this method too frequently, as the chemical agents may start to wear out and corrode the pipes with repeated usage.

Both solutions are suitable for removing small amounts of rust and corrosion. If you sit on the problem, large portions of your pipe will become corroded. And to resolve that, you will need to call a professional plumber, who will repair or replace the pipelines.

How To Prevent Plumbing Corrosion

Let’s be honest - it is impossible to entirely avoid corrosion in your pipelines. These pipes allow large volumes of water to pass through them daily, so they naturally corrode with time. The best you can do is slow down the process by taking preventative measures.

These measures can include using high-quality pipes, coating the pipes with insulating materials and so on. This will allow you to use them for a long time without any issues. And even if they start to corrode with time, you can use the information we have provided to deal with this plumbing concern.

For professional advice from Sydney plumbers who specialise in pipe repair, speak to our team today. We can find the best solution for your home and budget!

Latest Blogs Articles

Does Baking Soda Work To Unblock Drains?

Does Baking Soda Work To Unblock Drains?

Wondering how you can unclog your drains with baking soda? This article will teach you how to use this household product effectively to unblock your drains!

9 Ways You Can Clear A Blocked Drain

9 Ways You Can Clear A Blocked Drain

Looking for the most effective ways to clear a blocked drain? Then take a look at these 9 methods to help you get quick and hassle-free results.

Drain And Sewer CCTV Cameras To Locate Pipe Blockages And Damage Easily

Drain And Sewer CCTV Cameras To Locate Pipe Blockages And Damage Easily

Do you have a problem with your plumbing? Find out how CCTV inspections are effective in locating a blocked or damaged pipe.